Workshop
BASIC CHECK-OVER - £50
Suitable for bikes that are in a very good state of repair and only need a check-over. Not suitable for bikes that require any level of cleaning.
- Wipe down frame and inspect cycle (we will advise if extra work is needed)
- Inspect frame and forks for damage and wear.
- Safety check (check nuts and bolts and moving parts).
- Gears checked, tuned and re-aligned (front and rear).
- Check condition of headset.
- Brake calipers inspected and brake pads replaced (includes check inner brake cable).
- Oil chain and check wear and condition (replaced if drivetrain does not require degreasing and cleaning).
GENERAL SERVICE - £100
Recommended every 3 to 6 months for those who ride regularly, dependent on the time of year and conditions ridden in.
- Wipe down frame, forks and inspect cycle.
- Check all bolts, handlebar and stem assembly. Tighten all bolts to the recommended torque setting.
- Gears checked, tuned and re-aligned (front and rear).
- Brakes checked, tuned and re-aligned (front and rear).
- Brake calipers inspected and brake pads replaced (includes check inner brake cable).
- Drivetrain removed, de-greased, serviced and refitted including chainset, bottom bracket, chain, cassette, derailleurs and pedals (parts replaced if worn).
- Wheels trued and loose, missing or damaged spokes replaced.
- Headset inspected and re-greased.
- Wheel hubs inspected and re-greased.
FULL SERVICE - £150
Recommended every 12 to 18 months for riders who use their bicycles frequently or ride long distances in all weathers.
- Bicycle stripped of all parts, cleaned, inspected throughout, checked for damage.
- Check all bolts, handlebar and stem assembly. Tighten all bolts to the recommended torque setting.
- Gears checked, tuned and re-aligned (front and rear).
- Brakes checked, tuned and re-aligned (front and rear).
- Brake calipers inspected and brake pads replaced (includes check inner brake cable).
- Drivetrain removed, de-greased, serviced and refitted including chainset, bottom bracket, chain, cassette, derailleurs and pedals (parts replaced if worn).
- Handlebars cleaned back, cabling checked and refitted (includes inner and outer cables).
- Wheel hubs stripped, serviced and re-greased.
- Headset stripped, serviced, surface faced (if required) and re-greased.